Low Loss Plenum LMR-1200-LLPL Coax Cable with Organge FRPVC jacket

SKU: LMR-1200-LLPL

Contact us for latest price
In Stock


Calculate Shipping



Freight to be quoted - $0.00
As the size and weight is not normally known we use several freight carriers to ensure you get the best price. Complete your order or quote and we will get back to you with the available freight options.

The LMR-1200-LLPL 50 Ohm flexible coax cable from Times Microwave has a Foam PE dielectric. The LMR-1200-LLPL coax is constructed with a 30.48mm jacket made of coax has a shield count of 2, a RF shielding of 90 dB and the maximum frequency for this Time Microwave coaxial cable is 2.5 GHz. LMR-1200-LLPL coax cable has an attenuation at 1 GHz of 1.5 db/100ft .

Rojone has been the Times Microwaves Australian distributor for over 35 years and can custom manufacture LMR cable assemblies to your exact needs. We have a dedicated QA department that can test cable assemblies up to 50 GHz as well as perform PIM testing at 750-800 MHz, 900MHz 2100-2200 MHz frequency.

  • LMR® - LLPL is an indoor highly fire retarded cable intended specifically for runs within return air handling plenums (e.g. dropped ceilings, raised floors). It has a UL/NEC & CSA rating of ‘CMP’ and ‘FT6’ respectively
  • Flexibility and bendability are hallmarks of the LMR- 1200-LLPL cable design. The flexible outer conductor enables the tightest bend radius available for any cable of similar size and performance
  • Low Loss is another hallmark feature of LMR-1200- LLPL. Size for size LMR has the lowest loss of any flexible cable and comparable loss to semirigid hard-line cables.
  • RF Shielding is 50 dB greater than typical single shielded coax (40 dB). The multi-ply bonded foil outer conductor is rated conservatively at > 90 dB (i.e. >180 dB between two adjacent cables)
  • Weatherability: LMR-1200-LLPL cables are designed for indoor Plenum applications. Black jacketed LMR-LLPL versions can be supplied for applications that originate outdoors (e.g., rooftop) and subsequently enter the building.
  • Connectors: Type-N male and female connectors are available for LMR-1200-LLPL cable. Other interface types can be provided by using a short jumper cable assembly
  • Cable Assemblies: All LMR-1200-LLPL cable types are available as pre-terminated cable assemblies. Refer to the section on FlexTech for further details
LMR-1200-LLPL
Model # 54063
Brand Times Microwave Systems
Unit Of Measure M
Performance Property Units US (Metric)
Velocity of Propagation % 76  
Dielectric Constant  NA

1.73

 
Time Delay nS/ft (nS/m) 1.34 (4.40)
Impedance ohms 50  
Capacitance pF/ft (pF/m) 26.7 (87.6)
Inductance uH/ft (uH/m) 0.067 (0.22)
Shielding Effectiveness dB >90  
DC Resistance      
Inner Conductor ohms/1000ft (/km) 0.37 (1.21)
Outer Conductor; ohms/1000ft (/km) 0.37 (1.21)
Voltage Withstand Volts DC 6000  
Jacket Spark Volts RMS

9000

 
Peak Power kW 90  

Mechanical Specifications

Performance Property Units US (metric)
Bend Radius: installation in. (mm) 6.50 (165.1)
Bend Radius: repeated in. (mm) 12.0 (304.8)
Bending Moment ft-lb (N-m) 15.0 (20.34)
Weight lb/ft (kg/m) .0.7 (1.04)
Tensile Strength lb (kg) 975 (442.7)
Flat Plate Crush lb/in. (kg/mm) 375 (6.70)

Enviromental Specifications

Performance Property oF oC
Temperature Range +23/+167 -5/+75
Storage Temperature Range +23/+167 -5/+75
Operating Temperature Range +23/+167 -5/+75
Description Material  In. (mm)
Inner Conductor BC Tube 0.310 (7.87)
Dielectric Low Density PTFE 0.920 (23.37)
Outer Conductor Aluminum Tape 0.926 (23.52)
Overall Braid  Tinned Copper 0.972 (24.69)
Jacket Orange FRPVC 1.200 (30.48)
Datasheet:

More From This Category